BIBO 2 Dual Extruder 3D Printer — WiFi, Touchscreen, Heated Bed, As-Is

The BIBO 2 is a dual-extruder 3D printer designed for precision and versatility, built within a sturdy enclosed aluminum frame. Featuring an MKS TFT touchscreen interface with WiFi capability, it allows direct control of key functions such as Preheat, Move, and Leveling. This model (BIBO2 ID 12131312L15J01M) supports dual-material and dual-color printing, with compatibility with standard 1.75 mm filaments.

The printer includes a heated removable glass build plate, dual filament feeds, and connectivity options via USB, SD card, or WiFi. It is compatible with Cura, Repetier-Host, and Simplify3D software. Typical build volume is approximately 214 × 186 × 160 mm, with layer resolutions as fine as 0.05 mm. Designed for materials such as PLA, ABS, PETG, TPU, nylon, and PVA support filaments.

Unit powers on and the touchscreen responds normally, but no further testing was conducted.
Power cord included; two partial Hatchbox PLA spools (Gold and True Blue) included as shown.

Condition

In fair cosmetic condition with visible wear from prior use. Light scratches and adhesive residue are present on the panels, and the front acrylic door has a small crack near the handle. The build platform shows typical signs of prior filament use. Printer powers on and menu functions respond, but printing, calibration, and extrusion functions have not been tested. Sold as-is, untested.

Dimensions

Approx. 16 × 19 × 13 inches (Height × Width × Depth)

Technical Specifications

• Model: BIBO2 Dual Extruder
• Print Volume: 214 × 186 × 160 mm (8.4 × 7.3 × 6.3 in)
• Filament Diameter: 1.75 mm
• Nozzle Diameter: 0.4 mm
• Supported Materials: PLA, ABS, PETG, TPU, PVA, Nylon, Wood
• Layer Resolution: 0.05–0.3 mm
• Connectivity: USB, SD Card, WiFi
• Software: Cura, Repetier-Host, Simplify3D
• Power Input: 100–130V / 220–240V
• Hotend Temperature: Up to 270 °C
• Heated Bed: Yes (removable glass plate)